Spooky Halloween Design Inspiration

Happy Halloween!

To celebrate we have 3 amazing halloween design contest winning designs to bring the feeling of ghosts and pumpkins for you electronics entertainment.

  1. HalloweenGhost by designgameinc

Screen Shot 2018-10-31 at 1.10.04 PM.png

From the README:

“This creepy PCB has red LED eyes and eerie sound comes out of its slotted mouth (loudspeaker is on the bottom side). The sound is generated by an ATMega32 MCU. Any wave file can be converted to 8 kHz samples and inserted into the code (thanks to Rejith, see http://avrpcm.blogspot.com/2010/11/playing-8-bit-pcm-using-any-avr.html?m=1 for more details about MCU firmware). The power is provided via a microUSB connector (no data lines, just power) and will therefore start to spook as soon as connected to any USB port (might also possess the device at the other end of the cable, use at your own risks). The ATMega32 can be programmed using the ICP connector. All the parts are on the bottom side and only the LEDs on the top side. Note the ghost’s pupils are the LEDs cathode mark. Happy Halloween!”

 

2. Halloween LED scary pumpkin by haroldocalvo

Screen Shot 2018-10-31 at 1.13.30 PM.png

“Halloween LED scary pumpkin”

The eye’s and mouth light up in this scary pumpkin!

3. Halloween Pumpkin LEDs by eugene.kim.pcb

Screen Shot 2018-10-31 at 1.19.47 PM.png

Halloween IoT Pumpkin!  This  one uses the Texas Instruments CC3220MODSF12MOBR to connect and control the LEDs on this Pumpkin.  Check it out!

Thank for all the halloween submissions.

Have a great halloween!

Michael

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s